Installing a compound bow can be an intimidating but rewarding task for archers. To ensure that your bow is installed correctly, it is important to understand the proper steps and procedures to follow. Today we will take a look at How to install a Compound Bow Right Hand Version – Yescom.
Table of Contents
Tools Needed
Before we begin, you will need the following tools:
- Phillips Screwdriver
- Flathead Screwdriver
- Allen Wrench
Preparing Your Bow
Before installing the bow, you must ensure the bow is properly configured. This involves steps such as checking the arrow cutter, draw weight, draw length, and centering the arrow rest. Let’s take a look at each of these steps:
Check Arrow Cutter
The arrow cut should be equal to the arrow length so the arrow will not be able to move around inside the bow.
Check Draw Weight
The draw weight should be checked to make sure it is set to the archer’s draw weight. This can be adjusted using the Allen key.
Check Draw Length
The draw length should be checked to make sure it is set to the archer’s draw length. This can be adjusted using a Phillips screwdriver.
Center Arrow Rest
The arrow rest should be centered so the arrow will be able to fly straight. This can be adjusted using a flathead screwdriver.
Installing the Bow
Once the bow has been properly configured, you are now ready to install the bow. Here are the steps for installing the Right Hand Version – Yescom bow:
- Mount the sight onto the riser hand. This is done by aligning the sights with the holes and screws.
- Secure the mounting bolts with an Allen key. Be careful to not over-tighten.
- Attach the arrow rest, nocking point and peep sight.
- Tighten the bolts with an Allen key. Again, be careful not to over-tighten.
Installing a compound bow is a rewarding and challenging task. By following the above steps and using the appropriate tools, you can ensure your bow is properly installed. With a properly installed bow, you will be ready to hit the range and take your shooting to the next level.
How to Install Compound Bow Right Hand Version – Yescom
Step by Step Setup of right hand compound bow. #bowling #compoundbow #metime #yescomusa
Checkout Here: https://www.yescomusa.com/collections/archery-bows
Source video. Follow the youtuber for more.
Related Products:
- How To Install Nocking Point On Compound Bow?
- How To Install Peep Sight On Compound Bow?
- How To Install A Peep Sight On A Compound Bow?
- How to install Wrist Sling on your Compound Bow — Elong Outdoor Product Ltd.
- How To Set Draw Length On Compound Bow?
- How To Change Draw Weight On Compound Bow?
- How To Install A Bow Sight.
- How To Adjust Cam Timing On A Compound Bow?
- How To Adjust The Poundage On A Compound Bow?
- Yescom Compound Bow
- How To Change Draw Length On A Compound Bow?
- How To Change A Peep Sight On A Compound Bow?
- How To Set Up A Compound Bow?
- How to Adjust the Draw Weight of Your Compound Bow
- How To Adjust Draw Weight On A Bear Compound Bow?
Last update 2021-01-05. Price and product availability may change.