Having the right compound bow setup and tuning can make or break your shooting experience. Understanding the different components of a compound bow, it’s setup and how to tune it is essential to get the most out of your shooting. Whether you’re a beginner or an experienced shooter, setting up your bow correctly is critical in getting the best performance out of it. The following provides some proven compound bow setup and tuning tips so you can get the most out of your shooting experiences.
Table of Contents
- 1 Adjusting Draw Length
- 2 Setting Draw Weight
- 3 Checking for Center Shot
- 4 Adjusting Cable Length and Serving Size
- 5 Tightening the Limb Bolts
- 6 Bow Stabilizer For Compound Bow Bee Stinger
- 7 110 Lbs Compound Bow
- 8 Bear Compound Bow Legend
- 9 Bear Compound Bow For Adults
- 10 Compound Bow Hooks For Hanging
- 11 Diamond Edge Sb 1 Compound Bow
Adjusting Draw Length
The first step to setting up and tuning your compound bow properly is to adjust the draw length. This can be done by using a draw board or by measuring your draw length with a string. Adjusting the draw length of your bow allows it to shoot at its optimal performance level. A draw length that is too long will result in an arrow that bends too much and causes too much friction between the arrow and the string resulting in a slower arrow speed. On the other hand, having a draw length that is too short can overload the bow’s draw weight resulting in increased noise and vibration.
Setting Draw Weight
The next step to setting up your compound bow is to adjust the draw weight. This is done by turning the limb bolts located on the bow. It is important to adjust the draw weight correctly in order to get the maximum performance out of your bow. If the draw weight is too light, the arrow will not achieve its maximum speed, resulting in decreased accuracy. On the other hand, if the draw weight is too high, the string will be too difficult to draw back and the bow will perform less efficiently.
Checking for Center Shot
Once the draw length and draw weight have been adjusted correctly, the next step is to check for a proper center shot. This is done by using an arrow rest and a paper plate. A center shot ensures that the arrow will land in the same place each time you shoot it. This is especially critical for target shooting and increase your accuracy when taking shots at long range.
Adjusting Cable Length and Serving Size
The fourth step of setting up and tuning your compound bow is to adjust the cable lengths and serving size. This is best done by an experienced bow technician but can also be done in your home. The cables should be adjusted so they are snug but not overly tight. The serving size should be as small as possible and should not interfere with the arrow flight.
Tightening the Limb Bolts
Finally, the fifth and last step to setting up and tuning your compound bow is to properly tighten the limb bolts. This can be done using a torque wrench or by using your hands. Make sure the bolts are tight but not overly tight as this can result in damage to your bow.
Following these proven compound bow setup and tuning tips will ensure that your bow is performing at its optimum level. Taking the time to adjust the draw length, draw weight, cable lengths, serving size and limb bolts can significantly increase your performance in the field and help make you a better shooter. With a proper compound bow setup, you’ll be able to shoot accurately and consistently and get the most out of your shooting experience.
Proven Compound Bow Setup and Tuning Tips
http://www.deeranddeerhunting.com Deer Talk Now. Setting up and tuning a compound bow correctly will greatly improve its accuracy, hunting penetration and reliability. The process can be intimidating, but can be accomplished with the help of a professional bow technician, or on your own. D&DH Editor Gordy Krahn’s new Mathews Triax is outfitted and we get a bunch of great compound bow setup and tuning tips along the way. Season 7. Episode 11.
Connect with us:
Facebook: hhttps://www.facebook.com/deerhuntingmag/
Twitter: https://twitter.com/deerhuntingmag
Instagram: https://www.instagram.com/deeranddeerhunting_/
• Watch the previous episode of Deer Talk Now: https://www.youtube.com/watch?v=Z2KVntG_F4g
• How to Setup a Bow Rest: http://www.deeranddeerhunting.com/articles/deer-news/create-a-precise-rest-setup-for-improved-bowhunting-accuracy
• D&DH Guide to Better Bowhunting: https://www.shopdeerhunting.com/deer-and-deer-huntings-guide-to-better-bowhunting-v6706
Source video. Follow the youtuber for more.
Related Products:
- Bow Tuning Tips/Basic Rest Setup
- Bow Tuning Tips/ Making a Compound bow String from Scratch
- Bow Tuning Tips / Quiver Installation
- Bow Tuning Tips / Complete Bow Set Up Series Part1
- How to fit a peep sight – Compound Bow Setup
- Bowhunting How-to: Paper tuning
- PSE Bow Setup | Setting Up a New Compound Bow
- NRTR 11 – How to Setup Your Sight
- TGO | Martin Compound Bow, No Sights Setup!
- TUNING a Whisker Biscuit Arrow Rest
- T-Bone's Tips: How To Set Up A Low-Poundage Bow
- Stabilizer Setup & Unboxing
- How To Adjust Draw Length On Bear Compound Bow?
- Bowfishing Setup 2021
- Complete Muzzy LV-X Bowfishing Setup Quick Draw Gargod Mike's Archery
Last update 2021-01-05. Price and product availability may change.