Restringing a compound bow is a task that should only be undertaken if you are familiar with bow tuning and understand how bows work. It can be dangerous if an inexperienced archer attempts to re-string a compound bow without understanding the basic principles of archery and bow tuning. Even an experienced archer should use caution and employ proper techniques when restringing any compound bow.
Table of Contents
- 1 Materials Needed For The Task
- 2 Step-by-Step Instructions
- 2.1 Step 1: Begin By Relaxing The Bow Strings
- 2.2 Step 2: Detach The Cable Slide From The Limb
- 2.3 Step 3: Attach The New String To The Limb
- 2.4 Step 4: Attach The Nock Set To The String
- 2.5 Step 5: Connect The Cables To The String
- 2.6 Step 6: Adjust The Cable Tension
- 2.7 Step 7: Re-Attach The Limbs To The Limb Pockets
- 2.8 Step 8: Adjust The Draw Length
Materials Needed For The Task
Before attempting to restring a compound bow, make sure you have all the proper materials and tools. The materials, tools and supplies you will need include:
- Compound bow string
- Nock set
- Cable slide
- Horsehair bow stringer
- Lighter or matches
- Cable aligner tool
- Allen wrenches or other hex wrenches
- Tape measure
Step-by-Step Instructions
The following instructions outlining the steps to restringing a compound bow are based on a typical compound bow and can vary with other models. Therefore, always consult the instruction manual that came with your particular bow.
Step 1: Begin By Relaxing The Bow Strings
The first step in restringing a compound bow is to relax the bow strings by detaching both the top limb and the bottom limb from the limbs pockets. To unhook the limb from the limb pocket, use a hex wrench to loosen the limb bolts on the limb pockets. Once the bolts are loosened, you can carefully slide the limb out of the pocket.
Step 2: Detach The Cable Slide From The Limb
The next step is to detach the cable slide from the limb. You can do this by loosening the cable slide bolt and then sliding the cable slide out of the limb.
Step 3: Attach The New String To The Limb
Now that the limbs are free, you can attach the new string to the limb. Start by lightly (using a lighter or matches) heating up the end of the new string and then thread it through the limb-tip loop.
Step 4: Attach The Nock Set To The String
After attaching the string to the limb, attach the nock set to the end of the string using the same heating process. Make sure the nock set is attached securely and not twisted or bent.
Step 5: Connect The Cables To The String
Next, attach the new string to the cables. This can be done by threading the string through the cable slide and then threading it around the pulley wheel. Once the string is around the pulley wheel, carefully attach the string to the cable using the loop-over-loop method.
Step 6: Adjust The Cable Tension
The next step is to adjust the cable tension. This can be done by adjusting the cable stops on the cam and/or the bow press; however, you should consult your compound bow’s instruction manual to determine the correct cable tension settings. Make sure the cables are even and not twisted before you adjust the cable tension.
Step 7: Re-Attach The Limbs To The Limb Pockets
Once the cable tension is adjusted, you can re-attach the limbs to the limb pockets. To do this, thread the limbs into the limb pockets and make sure the limb bolts are tightened securely.
Step 8: Adjust The Draw Length
The final step is to adjust the draw length of the bow. This can be done by adjusting the draw stop on the cam and/or adjusting the draw length on the bow press. Again, make sure to consult the bow’s instruction manual for the correct settings and always make sure the draw length is set correctly.
Restringing a compound bow is a complex process that requires knowledge and skill to do it properly. Having the right materials and taking the time to understand the instructions is essential when attempting to restring a compound bow. If done correctly, restringing a compound bow can improve accuracy, optimize the power of your shot, and make your bow look almost like new. With practice and patience, anyone with basic archery knowledge can learn to restring a compound bow.
Related Products:
- How Often Do You Need To Restring A Compound Bow?
- How Often Should You Restring A Compound Bow?
- How Do You String A Compound Bow?
- How Do You Tune A Compound Bow?
- How Do You Adjust Draw Length On A Compound Bow?
- How Do You Measure Draw Length For A Compound Bow?
- How Do You Adjust A Compound Bow?
- How Do You Shoot A Compound Bow?
- How Do You Paper Tune A Compound Bow?
- How Long Does It Take To Restring A Compound Bow?
- How To Restring Compound Bow?
- How Much To Restring A Compound Bow?
- How Much Is It To Restring A Compound Bow?
- How Do You Measure Draw Length On A Compound Bow?
- How Do You Sight In A Compound Bow?
Last update 2021-01-05. Price and product availability may change.