Adjusting the draw length on a Martin compound bow can seem like a daunting task, but if you have the right tools and a bit of patience, it can be done in just a few simple steps. It’s important to understand that adjusting the draw length on most Martin models does not require removing the limbs from the bow, so there is no need to worry about damaging the bow in the process. However, you should still take extra precautions to make sure thebow is properly fitted to your body for optimal shooting accuracy.
Table of Contents
Tools You’ll Need
- Socket Wrench
- Allen Wrench
- Ruler (or measuring tape)
- Teflon Fletching Tape (or other similar product)
Steps to Adjust
Step 1: Measure the Current Draw Length
Before you can start adjusting the draw length, you’ll need to measure the current draw length of your bow. To do this, measure the distance from the deepest part of the grip to the string, when the bow is fully drawn. Do not measure from any other parts of the bow, as you’ll get an inaccurate measurement.
Step 2: Use Your Socket Wrench & Allen Wrench
Once you have your measurements, you’ll need to use both your socket and allen wrenches to loosen the bolts on either end of the draw length adjustment posts. Keep in mind that you should be loosening the bolts in a counterclockwise direction.
Step 3: Move the Draw Length Posts
Next, you’ll need to adjust the draw length of your bow by moving the draw length posts up or down on either end of the bow. To increase the draw length, you’ll move the posts down, and to decrease the draw length, you’ll move the posts up. The amount of adjustment will depend on your Martin model. Most Martin models have draw length adjustment of up to four inches.
Step 4: Re-Tighten the Bolts
Once you’ve adjusted the draw length to your desired measurements, you’ll need to re-tighten the bolts on either end of the draw length posts. Make sure to re-tighten the bolts in a clockwise direction, and be careful not to over-tighten or else you may damage the posts.
Step 5: Apply Teflon Fletching Tape
Finally, to ensure your draw length adjustment holds in place, you’ll want to apply Teflon fletching tape to the draw length posts. The tape will help the posts from shifting when you draw the bow. This is an important step to take, as if the draw length posts are not secure, the draw length of your bow will not hold.
To adjust the draw length on a Martin compound bow is a simple and straightforward process that should not take more than a few minutes. With the right tools, patience and a bit of practice, you can have your draw length adjusted in no time. Once the bow is adjusted, it’s important to take extra precautions to make sure the draw length posts are secured in place and not over-tightened. This will ensure your draw length adjustment will carry over to each and every shot you take with the bow.
Related Products:
- How To Adjust Draw Length On A Pse Compound Bow?
- How To Adjust Draw Length On A Compound Bow?
- How To Adjust Your Draw Length On A Compound Bow?
- How To Adjust Draw Length On Bear Compound Bow?
- How To Adjust Draw Length On Compound Bow?
- How To Adjust Compound Bow Draw Length?
- How To Adjust Draw Weight On A Martin Compound Bow?
- How Do You Adjust Draw Length On A Compound Bow?
- How To Adjust Draw Length On A Hoyt Compound Bow?
- How To Adjust Draw Length On Old Compound Bow?
- How To Adjust Draw Length On A Diamond Compound Bow?
- How To Adjust The Draw On A Compound Bow?
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How To Determine Compound Bow Draw Length?
- How To Adjust Draw Length On A Bear Compound Bow?
Last update 2021-01-05. Price and product availability may change.