Adjusting the draw length of a compound bow can be a tricky process, particularly if you have an old bow. It requires tools, knowledge of the mechanics of a compound bow, and a bit of patience. There are also some safety precautions you’ll need to take, as any change to the draw length of the bow can significantly increase the pressure applied to it when drawn and released. With a bit of instruction, however, you should be able to adjust the draw length of your old compound bow with relative ease.
Table of Contents
Steps to Adjust Draw Length on an Old Compound Bow
Step 1: Unstring & Disassemble the Bow
To adjust the draw length of the bow, you’ll need to remove the strings from the bow. There are several ways of doing this, from using a bow press to physically remove the string or using a tool known as a Bowmaster. Once the strings are removed, you’ll need to disassemble the bow by unscrewing the limb bolts on both limbs and then taking off the limb pocket and limb mounting hardware.
Step 2: Check the Draw Length Chart
Before adjusting the draw length, you should consult a chart, such as the one included with most compound bows, to determine the range of draw lengths available and the corresponding strength of the bow limbs. The chart will list the draw length range and the power strokes of the limbs. A higher power stroke means greater draw weight, while a lower power stroke will mean less draw weight.
Step 3: Make Adjustments
Once you have determined the correct draw length for your bow, you can make the necessary adjustments. Using a tool such as an Allen key or a torx bit, adjust the limb bolts to the desired draw length. Make sure to adjust both limbs evenly, as an unbalanced draw length can drastically reduce the accuracy of the shot. Bufflocker or Loctite lubricant can be used to prevent the limb bolts from coming loose over time.
Step 4: Test and Recheck
Once the adjustments have been made, you should test the draw length of the bow. Hold the bow at full draw and slowly release, making sure that the draw length remains consistent. If it does not, then you may need to adjust the limb bolts further. You should also recheck the draw length with a bow scale in order to make sure that it is at the desired setting.
Adjusting the draw length of an old compound bow to suit the needs of the archer is a difficult but necessary process. By following the steps outlined above, you should be able to properly adjust the draw length on your old compound bow. Make sure to consult a draw length chart to determine the correct settings for your bow, and always use the necessary safety precautions when adjusting the bow. With careful attention and caution, you should be able to adjust the draw length on your old compound bow with relative ease and accuracy.
Related Products:
- How To Adjust Draw Length On A Pse Compound Bow?
- How To Adjust Your Draw Length On A Compound Bow?
- How To Adjust Draw Length On Bear Compound Bow?
- How To Adjust Draw Length On Compound Bow?
- How To Adjust Draw Length On A Compound Bow?
- How To Adjust Draw Length On A Diamond Compound Bow?
- How To Adjust Draw Length On A Martin Compound Bow?
- How To Adjust Draw Length On A Hoyt Compound Bow?
- How To Adjust Draw Length On A Bear Compound Bow?
- How To Adjust Compound Bow Draw Length?
- How To Adjust The Draw On A Compound Bow?
- How To Adjust Draw Weight On Compound Bow?
- How To Determine Draw Length On Compound Bow?
- How Do You Adjust Draw Length On A Compound Bow?
- How To Adjust Draw Weight On Pse Compound Bow?
Last update 2021-01-05. Price and product availability may change.