Adjusting the draw weight on a compound bow is something that can be done by a bow technician or, with a few tools and some patience, an experienced bowhunter. The process of changing the draw weight on a compound bow is fairly straightforward, however it can be a time consuming and meticulous process. The draw weight is the amount of force it takes to draw the bowstring back to the back wall. This can be adjusted depending on the user and their preferences. By altering the draw weight, you can ensure that you have an optimal bow setup for your personal shooting style.
Table of Contents
Tools Needed
The basic tools needed to adjust the draw weight on a compound bow are a set of hex wrenches, a bow press, and cable lube or wax. A bow press is not necessary to adjust draw weight, however it is greatly recommended, as it is a much safer and faster way to adjust draw weight than trying to do so without one. Cable lube or wax is needed to lubricate the cables and reduce friction on them.
Adjustments
1. Buss Cable & Yoke
The first step in the process is to remove the buss cable and yoke (often referred to as a yoke turner). The buss cable and yoke is a small piece of metal attached to the bowstring where it connects to the cam. To remove it, you’ll need to slip the string loop off of the buss cable, and then remove the nut and bolt that holds the buss cable and yoke in place. Once the buss cable and yoke are removed, the string loop can be slipped off of the bowstring, and the bowstring can be removed.
2. String Loop & String Receivers
The next step is to adjust the string loop and string receivers. The string loop is the loop of string that connects the buss cable and yoke to the bowstring. The string receiver connects the bowstring to the cams of the bow. The draw weight can be adjusted by either loosening the string loop or tightening the string receiver. If the string loop is loosened, then the draw weight will be reduced, and if the string receiver is tightened, then the draw weight will be increased.
3. String Length & String Stretch
The final step is to adjust the string length and string stretch. The string length is the overall length of the bowstring, and can be adjusted by either adding or removing twists in the bowstring. The string stretch is the amount of tension that is placed on the string when it is being sat on the bow. This can be adjusted by either loosening or tightening the string tension on the string receivers.
Conclusion
Adjusting the draw weight on a compound bow is not always a simple process but, with some patience and the right tools, it can be done relatively quickly. Following the steps outlined above should result in a bow that is set up for optimal draw weight for the individual shooter.
In conclusion, adjusting the draw weight of a compound bow can be done by anyone with the basic tools and some patience. Adjusting the draw weight ensures that the bow will be properly setup for the individual’s specific shooting style and will ensure that each shot is as accurate as possible.
Related Products:
- How To Adjust Draw Weight On A Martin Compound Bow?
- How to Adjust the Draw Weight of Your Compound Bow
- How To Adjust Compound Bow Draw Weight?
- How To Adjust Draw Weight On A Bear Compound Bow?
- How To Adjust Draw Weight On Compound Bow?
- How To Adjust Draw Weight On Pse Compound Bow?
- How To Adjust Draw Weight On A Compound Bow?
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How To Adjust Weight On Compound Bow?
- How To Adjust Draw Length On A Diamond Compound Bow?
- How To Adjust Draw Length On Compound Bow?
- How To Adjust The Draw On A Compound Bow?
- How To Adjust Weight On A Compound Bow?
- How To Adjust Draw Weight On A Compound Bow
- How to Adjust the Draw Weight on Your Genesis® Bow
Last update 2021-01-05. Price and product availability may change.