Adjusting the draw weight of a compound bow is an essential step to ensure you’re shooting with optimal performance and accuracy. Learning how to adjust the draw weight can be somewhat tricky as different bows call for different methods, but all of the adjustments are, fortunately, simple and can be done with the assistance of a certified technician or in the comfort of your own home with the right tools.
Table of Contents
Tools Needed
Before attempting to adjust the draw weight of a compound bow, it is important to make sure that one is adequately prepared and has the necessary tools and equipment. The following is a list of the main items needed to adjust the draw weight of a compound bow:
- A torque wrench
- Allen wrenches
- A bow scale or bow press
- Cable wax
Adjustment Process
Once the necessary tools and equipment are acquired, it is time to commence the draw weight adjustment process. The following provides an overview of the steps involved:
Step One: Release Pressure
Prior to making any adjustments, it is necessary to release the pressure on the bow. This can be done by disengaging the cables on the split limbs of the bow and resting the cable guard on the bow riser. Alternatively, the bow can be put in a bow press and the limbs can be pulled down with a scale.
Step Two: Adjust The Idler Wheel
The next step is to adjust the idler wheel. This is done by using a torque wrench that is set at the manufacturer’s specified torque setting for the specific bow model. The idler wheel adjustment is considered a “Fine Tune” adjustment and should not be made in large increments.
Step Three: Adjust The Cams
The cams are the primary area on a compound bow that can increase or decrease the draw weight. Adjusting the cams requires a special tool called an Allen wrench. If a cam has a single adjustment point, turning the Allen wrench clockwise until it stops will decrease the draw weight and vice versa will increase it. Many bows have dual adjustable cams, which have two adjustment points that can be used to change the draw weight. For those bows, an Allen wrench should be turned on the two points in opposite directions to make the draw weight lighter and vice versa to make the draw weight heavier.
Step Four: Check Tuning and Bow Performance
The last step is to test the bow’s performance after the adjustment is made. It is important to ensure the bow is properly tuned and that the draw weight is where it needs to be. After that, it is also necessary to lube the cables with wax or silicone lube to ensure the bow is performing at its best.
Adjusting the draw weight of a compound bow can be a bit of a tricky process, but with the right tools and a bit of practice, the process can be done easily and in the comfort of one’s own home. It is also important to note that it is highly recommended to seek the assistance of a certified technician if one is unsure of the process or just needs an extra set of hands.
With some knowledge and the right tools, anyone can adjust the draw weight of their bow and experience the best performance and accuracy from their compound bow.
Related Products:
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How To Adjust Draw Weight On Pse Compound Bow?
- How to Adjust the Draw Weight of Your Compound Bow
- How To Adjust Draw Weight On A Bear Compound Bow?
- How To Adjust Draw Weight On A Martin Compound Bow?
- How To Adjust Pull Weight On Compound Bow?
- How To Adjust Compound Bow Draw Weight?
- How To Adjust Draw Weight On Compound Bow?
- How To Adjust Draw Weight Compound Bow?
- How To Adjust The Weight On A Compound Bow?
- How to change the draw length and weight on a Barnett vortex hunter
- How To Adjust Weight On Compound Bow?
- How To Change The Draw Weight On A Compound Bow?
- How To Adjust Draw Length On A Martin Compound Bow?
- How To Change Draw Weight On Compound Bow?
Last update 2021-01-05. Price and product availability may change.