Adjusting the draw weight on a PSE compound bow is a simple but important maintenance ritual for any bow hunter to master. Knowing how to adjust the draw weight gives you more control of the force you exert when drawing back your bow, allowing you to shoot targets with the most accuracy and power possible. When done properly, adjusting the draw weight of your PSE compound bow can greatly improve performance in the field.
Table of Contents
Step 1: Determine The Ideal Draw Weight for Your Bow
Before adjusting the draw weight of your PSE compound bow, it is important to determine what weight is right for you. This is harder to determine if you are a newer archer, but there are a few things that you should keep in mind. First, bow hunting usually requires a draw weight of at least 40 pounds. Secondly, the cumulative weight of the bow and accessories should not exceed 10 percent of your body weight. Finally, it is always best to use the heaviest draw weight that you are comfortable with, as it will increase the accuracy of your shots.
Step 2: Gather the Necessary Materials
Before you begin the process, you should make sure that you have the right tools and materials. This is a relatively straightforward process, but it is important that you have the right items on hand. You will need a bow press, a torque wrench or allen wrench, a screwdriver, and adjustment cables or modules to adjust the draw length. These tools and materials are all available at local archery stores or online shops. You will also want to wear safety glasses and protective gloves to protect yourself while working with the bow.
Step 3: Adjust the Draw Weight
Once you have collected the necessary materials and tools, you can begin adjusting the draw weight of your PSE compound bow. Start by tightening the bow press against the handle of the bow and then loosening the limb bolts. Next, adjust the cable length by either adding or removing cable or modules until the desired length is achieved. Finally, tighten the limb bolts back up to secure the cables in place. Once you have done this, it is a good idea to check and make sure that the draw weight is still at the desired level and make any additional adjustments if necessary.
Step 4: Test and Confirm The Adjustments
Once you have finished adjusting the draw weight, it is important to test and confirm the adjustments before using the bow. You can do this by using draw length modules or Shooting Multiple Arrows at a Target Practice. By shooting multiple arrows, you can make sure that you are shooting with the right draw weight. If the arrows are not shooting as far or accurate compared to before, then you may need to adjust the draw weight again.
Adjusting the draw weight on a PSE compound bow is an important maintenance ritual that every bow hunter should master. Knowing how to properly adjust the draw weight of your bow can greatly improve performance in the field. Start by determining your ideal draw weight, gathering the necessary materials and tools, adjusting the draw weight, and then testing and confirming the adjustments. Once comfortable with the adjustment, you can begin practicing and enjoying the accuracy and power of your PSE compound bow.
Related Products:
- How To Adjust Draw Weight On Compound Bow?
- How To Adjust Draw Weight On A Martin Compound Bow?
- How To Adjust Draw Weight On A Compound Bow?
- How To Adjust Draw Length On A Pse Compound Bow?
- How To Adjust Compound Bow Draw Weight?
- How To Adjust Draw Weight On A Bear Compound Bow?
- How To Adjust Draw Weight Compound Bow?
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How to Adjust the Draw Weight of Your Compound Bow
- How To Adjust Draw Length On A Compound Bow?
- How To Adjust Weight On A Compound Bow?
- How To Change Draw Weight On Compound Bow?
- How To Change Draw Weight On A Compound Bow?
- How To Adjust The Draw On A Compound Bow?
- How To Adjust The Pull Weight On A Compound Bow?
Last update 2021-01-05. Price and product availability may change.