Adjusting the poundage of a compound bow is an important step to make sure the bow is calibrated for the shooter. It’s critical to dial in the draw weight of the bow for the shooter to maximize accuracy and performance when shooting. Doing so requires specific tools and knowledge to properly adjust the poundage.
Table of Contents
Tools Required to Adjust The Poundage On A Compound Bow
- Bow scale
- Arrow rest
- Torque wrench
Steps to Adjust The Poundage On A Compound Bow
Step 1: Determine the Desired Draw Weight
The first step when adjusting the poundage of a compound bow is to determine what draw weight the shooter desires. Manufacturers typically have charts that provide guidance on which draw weight is most suitable for the shooter. A knowledgeable professional at a bow shop can also help you identify the appropriate draw weight.
Step 2: Install The Bow Scale
Once the desired draw weight is identified, it’s time to install a bow scale to measure the bow’s poundage. Remove the arrow rest from the bow and install the bow scale. Follow the manufacturer’s instructions to properly install the bow scale.
Step 3: Check Draw Weight
Once the bow scale is installed, step away from the bow and draw it back to the anchor point. Measure and note the draw weight using the bow scale. Repeat the process if needed until you obtain a consistent reading.
Step 4: Make Adjustments If Necessary
If the draw weight is different from the desired draw weight, then the next step is to make adjustments to the poundage. The adjustment can be made by adjusting the limb bolts, cables, or cams on the bow. How to adjust these components will depend on the compound bow model and manufacturer. Make sure to refer to the manufacturer’s instructions for the specific compound bow model. As you make the adjustments, check the draw weight periodically, using the bow scale until the desired poundage is achieved.
Step 5: Secure The Adjustments
Once the adjustments have been made, a torque wrench should be used to ensure the components are properly secured and tightened. Using a torque wrench is important to ensure the components are not over or under-tightened, which could result in damage to the bow.
Adjusting the poundage of a compound bow is a critical step to ensure the bow’s performance when shooting. It requires specific tools and knowledge to make the adjustments, following the manufacturer’s instructions. Once the desired poundage is obtained, a torque wrench should be used to tighten the components to ensure the poundage does not change. With the proper procedure, the bow is now calibrated for the shooter.
Related Products:
- How To Adjust A Compound Bow Poundage?
- How To Adjust Poundage On Compound Bow?
- How To Change Poundage On A Compound Bow?
- How To Change The Poundage On A Compound Bow?
- How To Adjust Pounds On Compound Bow?
- How To Adjust Draw Weight On A Compound Bow?
- How To Adjust Pull Weight On Compound Bow?
- NRTR 4 – How to Adjust Poundage on Your Bow
- How To Adjust Draw Weight On Pse Compound Bow?
- How To Adjust The Weight On A Compound Bow?
- How To Adjust Draw Length On A Compound Bow?
- How To Adjust Draw Weight On A Martin Compound Bow?
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How To Adjust Draw Weight On Compound Bow?
- How To Adjust Cam Timing On A Compound Bow?
Last update 2021-01-05. Price and product availability may change.