Adjusting the pull weight of a compound bow is a necessary part of setting up a bow for shooting. Knowing how to adjust the pull weight on a compound bow is an important skill for anyone looking to ensure that the bow is properly calibrated to enable the best possible shooting accuracy. This guide will provide a step-by-step guide on how to adjust the pull weight on a compound bow.
Table of Contents
Step One
Before making any adjustments to the pull weight on a compound bow, the archer should check the manual for the bow that is being adjusted. The owner’s manual should contain the necessary information on how to adjust the pull weight for the specific bow.
Step Two
Once the owner’s manual is located, the archer will need to select the appropriate pull weight for the bow based on their strength and skill level. The pull weight of a compound bow typically ranges from 40-70 pounds of force. It’s important to select a pull weight that is not too heavy for the archer since too heavy of a pull weight can cause inaccurate shots.
Step Three
After the archer has selected the appropriate pull weight, they can start making adjustments. There are two main components of a compound bow that will need to be adjusted; the draw length and the draw weight. The draw length is adjusted using the cam adjustment screws, while the draw weight is adjusted using the bow’s limb bolts.
Step Four
To make adjustments to the draw length of a compound bow, the archer will need to adjust the cam adjustment screws located on either side of the bow. To increase the draw length, the archer should turn the cam screws clockwise, and to decrease the draw length of the arrow, the archer should turn the cam screws counterclockwise.
Step Five
To make adjustments to the draw weight of a compound bow, the archer will need to adjust the limb bolts located on either side of the bow. To increase the draw weight, the archer should turn the limb bolts clockwise, and to decrease the draw weight, the archer should turn the limb bolts counterclockwise.
Step Six
Once the draw length and draw weight of a compound bow have been adjusted, the archer should test the bow and make any necessary adjustments as needed. This should be done before taking the bow out in the field or shooting it for accuracy.
Adjusting the pull weight on a compound bow is an important aspect of bow setup that can greatly affect accuracy. By selecting the appropriate pull weight for the archer and then making the necessary adjustments to the draw length and draw weight, the archer will be able to ensure that their bow is properly configured and ready to shoot. With a little bit of patience and knowledge, any archer should be able to adjust the pull weight of their bow and make sure that they are able to hit their target.
Related Products:
- How To Adjust Pull Weight On Compound Bow?
- How To Adjust Draw Weight On Compound Bow?
- How To Adjust The Weight On A Compound Bow?
- How To Adjust The Pull On A Compound Bow?
- How To Adjust Compound Bow Draw Weight?
- How To Adjust Weight On Compound Bow?
- How To Adjust Weight On A Compound Bow?
- How To Adjust Draw Weight On Pse Compound Bow?
- How To Adjust Draw Weight On A Martin Compound Bow?
- How To Adjust Draw Weight On A Bear Compound Bow?
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How to Adjust the Draw Weight of Your Compound Bow
- How To Adjust Draw Weight Compound Bow?
- How To Adjust Draw Weight On A Compound Bow?
- How To Adjust Draw Length On Bear Compound Bow?
Last update 2021-01-05. Price and product availability may change.