Adjusting the weight on a compound bow is a necessary step to ensure your bow shoots correctly and with the desired force. Properly setting the draw weight can make a huge difference in the way a bow operates and its number of successful shots. It is important to remember to use the same techniques for both hands when adjusting your bow’s draw weight for maximum consistency. Read on for a step-by-step guide on how to adjust weight on a compound bow.
Table of Contents
Steps to Adjust the Weight on a Compound Bow
1. Set Your Bow’s Draw Length
The first step in adjusting your compound bow’s draw weight is to set the draw length. The draw length is the distance from the bow’s grip to the nock point. To achieve the most consistent draw weight, it is important to adjust the draw length until it matches your arm’s measurements. Make sure to set it so that the bowstring is at its centre point when you draw it back.
2. Adjust the Cams/Draw Stop
Once you have set your bow’s draw length, you can adjust the cams or draw stop. This will determine how far you can draw your bow back before it stops. Adjusting the cams or draw stop will allow you to increase or decrease the amount of weight you will be able to pull back. To adjust the draw stop, use the adjustment screws found at the back of the bow.
3. Adjust the Limbs
Once you have adjusted the cams/draw stop, you can adjust the limbs on your bow. This is an important step, as the limbs will have the biggest effect on the draw weight of your bow. Adjusting the limbs to increase or decrease the draw weight is easy to do. All you have to do is loosen the limb bolts, which are located on the outside of the limbs. Once the limbs have been loosened, you can adjust them to increase or decrease the draw weight. Be sure to tighten the limb bolts after you have made the adjustment.
4. Adjust the String
Finally, you can adjust the string to further customize the draw weight on your compound bow. This step is a little more complicated, as it involves changing the length of the bowstring. To do this, you will need to loosen the string, shorten or lengthen it, and then re-tune the bow. Be sure to use a bow press to make sure the string doesn’t move while you are shortening or lengthening it.
Adjusting the weight on a compound bow is an essential step to get the most out of your shooting experience. Properly setting the draw weight can make a world of difference, and it is important to remember to use the same technique for both hands so your shots are consistent. Adjusting the draw length, cams/draw stop, limbs and string will help ensure you have the right draw weight for your bow.
Although adjusting the weight on a compound bow can seem complicated, following the steps above will make the process easier. With some practice and patience, you will be able to easily adjust the weight on your bow and reap the rewards.
Related Products:
- How To Adjust The Weight On A Compound Bow?
- How to Adjust the Draw Weight of Your Compound Bow
- How To Adjust Draw Weight On A Martin Compound Bow?
- How To Adjust The Pull Weight On A Compound Bow?
- How To Adjust Pull Weight On Compound Bow?
- How To Adjust Draw Weight On A Bear Compound Bow?
- How To Adjust Draw Weight On A Compound Bow?
- How To Adjust Draw Weight On A Hoyt Compound Bow?
- How To Adjust Draw Weight On Compound Bow?
- How To Adjust Compound Bow Draw Weight?
- How To Adjust Draw Weight On Pse Compound Bow?
- How To Adjust Draw Weight Compound Bow?
- How To Adjust Weight On A Compound Bow?
- How to change the draw length and weight on a Barnett vortex hunter
- How To Adjust A Bear Compound Bow?
Last update 2021-01-05. Price and product availability may change.