Setting up a compound bow and properly aligning it can seem like a difficult and complicated process, but with the right tools and knowledge, it does not need to be. The purpose of following these steps is to make sure your bow setup is as accurate for your shooting form as possible. By following these steps, you’ll ensure that your bow will shoot accurately when you draw back, and the very first arrow shot should be in the center of the target.
Table of Contents
Step 1: Setting Up Your Bow
The very first step to making sure your compound bow is aligned properly is to properly set up your bow, which involves ensuring that it’s set to the proper draw weight, that the draw length adjustment is correctly set, and that your sight and peep sight are correctly attached and aligned. Once your bow is set up and ready to shoot, you’re ready to make sure it’s properly aligned.
Step 2: Setting the Sight Windows
The next step is to make sure that the sight windows are adjusting properly. Sight windows are the small openings in the front of the bow where the shooter looks through before shooting. For proper alignment of your bow, it’s important that these windows are level with each other.
To properly adjust your sight windows:
- Start by loosening the setscrews with an Allen wrench.
- Align the two windows so that they are parallel.
- Tighten the setscrews until the windows are secure.
Step 3: Adjusting the Sight Pin
The next step is to adjust the sight pin. The sight pin is the small pin that sits at the end of the sight bar that holds the arrow in place. This pin should be aimed at the bullseye before you shoot.
To adjust the sight pin:
- Loosen the setscrews with an Allen wrench.
- Move the sight pin to ensure that it’s pointed directly at the bullseye.
- Tighten the setscrews until the sight pin is secure.
Step 4: Adjusting the Peep Sight
The next step is to adjust the peep sight. The peep sight is the small cylindrical hole that sits at the back of the bowstring and is used as a reference point to align the sight pin at the bullseye. This must be correctly aligned with the sight pin before you shoot.
To adjust your peep sight:
- Loosen the setscrews with an Allen wrench.
- Rotate the peep sight until it’s in line with the sight pin’s aim.
- Tighten the setscrews until the peep sight is secure.
Step 5: Testing and Tuning
The final step is to test and tune your bow. You can do this by simply shooting a few arrows at a target to make sure that your setup is correct. If your shots are off, you’ll need to make minor adjustments to the sight windows, sight pin, and peep sight to get your arrows to the bullseye.
Once your bow is calibrated, you’re ready to shoot! Just remember: never shoot without proper protection, and make sure that you’re using arrows and other components that are appropriate for your bow setup!
In conclusion, setting up and aligning a compound bow doesn’t need to be a difficult task. With the right tools, and knowledge of the steps, you can make sure that your bow is shooting accurately with your first arrow. With a little practice, you’ll be able to make fine-tuned adjustments to the sight windows, sight pin, and peep sight to get your arrows to the bullseye.
Related Products:
- How To Adjust Peep On Compound Bow?
- How To Adjust The Sights On A Compound Bow?
- How To Adjust Peep Sight On Compound Bow?
- How To Adjust Sight Pins On A Compound Bow?
- How To Change A Peep Sight On A Compound Bow?
- How To Use Compound Bow Sights?
- How To Sight In A Compound Bow 1 Pin?
- How To Adjust Compound Bow Sights?
- How To Adjust Compound Bow Sight?
- How To Adjust Sight On Compound Bow?
- How To Adjust The Peep Sight On A Compound Bow?
- How To Adjust Pin Sights On A Compound Bow?
- How To Fix Peep Sight On Compound Bow?
- How To Sight In Your Compound Bow?
- How To Adjust A Compound Bow Sight?
Last update 2021-01-05. Price and product availability may change.