If you’re an archer or bowhunter, it’s important to know how to build a compound bow string. A properly constructed string will improve accuracy, reduce noise, and protect against wear and tear. Knowing how to customize a string for your compound bow will help you get the best performance out of your bow. Here is a step-by-step guide on how to construct a compound bow string.
Table of Contents
Gathering the Materials
The most important thing when constructing a compound bow string is to make sure you have the necessary parts in their proper sizes. You should have a few feet of linen and Dacron string material, depending on the size of the bow and the number of strands you plan to use. You will also need a push-in rod or a stringer, serving wax, and a jig or a device to hold the string while it is being served.
Constructing the Loop
The loop of the string is the part that interacts with the cams, and so it needs to be constructed carefully. Take a few feet of the string material, and cut it into six inches. Then take the nocking point and attach it to the string, making sure the pointed end is facing the outside. Hold the nocking points in place and make a loop at the other end, connecting the ends of the string material. This is the lacing loop.
Building the String’s Strands
The next step is to build the strands of the string. If you’re using two strands of string material, start by taking two six inch strands of either linen or Dacron material. For a three strand string, you will need three pieces of material. Then, attach the strands to the lacing loop, ensuring that the strands are even and in the correct order.
Serving the String
Once the strands are attached to the lacing loop, the next step is to serve the string. Serving is a process where a waxed thread is wrapped around the strands of the string, forming a protective coating around it. Start by attaching the serving wax onto the end of the thread, then loop the thread around the strands of the string and pull it tight. Work your way along the length of the string, paying special attention to the part of the string where it comes in contact with the cams. When you’re done, cut off the excess thread and use the burnishing tool to rub the serving down, making sure it is secure with no loose ends.
Assembling the String
Once the serving is complete, you can assemble the string. Start by attaching the end loops of the string material onto the cams, then stretch the string out and use the jig or stringer to hold it in place. Make sure that the string is as straight and even as possible, then apply the serving wax onto the strands and start serving the string once again. Work your thread around the string, being careful not to wrap too tightly as it could cause the string to break. When you’re done, use the burnishing tool once more to ensure the serving is secure.
Testing the String
Before using the string, it’s important to make sure it’s safe and undamaged. Start by checking for frays or signs of wear and tear, then test the serving by pulling on it gently. If it feels secure and doesn’t shift or move, then your string is good to go. Make sure to test the string before shooting it as well, as a worn or damaged string could cause damage to the bow.
Constructing a compound bow string requires time and patience, but it is essential for the safety and performance of your bow. By following the steps outlined above, you can construct a compound bow string that will help you achieve your shooting goals. With a bit of practice, you’ll be able to customize your own string and make sure your bow is performing at its best.
Related Products:
- How To Build A Compound Bow?
- How To Build a Compound Bowstring DIY | Bow and Arrow Part 3 | Stretching, Twisting & Burnishing
- How to Build a Compound Bowstring DIY | Bow and Arrow Part 2 | Serving End Loops with Tag Ends
- How to Build a Compound Bowstring | Bow and Arrow Part 1 | Bowstring Layout
- Archery Basics 15 – how to make your own bow string – english
- How To Change A Compound Bow String?
- How Often To Change Compound Bow String?
- How To Re String Compound Bow
- How To Add A Peep Sight To A Compound Bow?
- How to build an Invisible Bow rack
- How To Build A Compound Bow Press?
- How To Change Compound Bow String?
- How To Make A Compound Bow String?
- How To Build An Archery Target For A Compound Bow?
- How To String A Compound Bow Diagram?
Last update 2021-01-05. Price and product availability may change.