Changing the string on a compound bow can be a tricky task, and it can be especially difficult if you don’t know what you’re doing. There are a few steps to the process, and it’s important to follow them carefully in order to ensure that your bow is safe and that the string is put on correctly. In this article, we’ll provide you with a step-by-step guide on how to change the string on a compound bow.
Table of Contents
Steps To Change Compound Bow String
1. Gather Your Materials
Before you start any work on your bow, you’ll need to gather the materials and tools you’ll need. This includes your new string, some high-quality bow wax, a string stop, a bow press, and some protective gloves. It’s also important to make sure any sharp edges on the bow are properly covered or sanded to prevent any damage to the string.
2. Detach the Old String
The next step is to detach the old string from the bow. You’ll want to use the bow press to remove the tension from the string, which will make it easier to remove. Carefully slide the string off of the cams and remove it from the bow. Once the old string is removed, inspect the cams for any signs of damage.
3. Attach the New String
Once you’ve inspected the cams, you can start attaching the new string. For most compound bows, this process is done in the same way:
- Start by sliding one end of the new string onto one of the cams, then slide the new string underneath the cam.
- Pull the other end of the string onto the opposite cam, making sure to slide the string under the opposite cam.
- Pull the string tight, making sure there are no kinks or twitches in the new string.
- Secure the string to the cams using the string stop.
- Apply bow wax to the string and spread it evenly with your fingers.
4. Test The Bow
Once the string is properly attached to the compound bow, it’s time to test it out. This is an important step, as it allows you to check for any loose or over-tightened strings. It also allows you to make sure the string is waxed properly and that there are no nicks or sharp edges. To test the bow, pull it back a few times and make sure the string is tight and the cams are rotating properly. If everything looks good, you can move onto the next step.
5. Unload the Compound Bow
Finally, you’ll want to make sure the compound bow is unloaded and stored away safely. This is a very important step, as it ensures that the bow does not get damaged or cause injury due to an accidental discharge. Make sure to follow the instructions for your specific bow to unload it correctly and store it away safely.
Changing the string on a compound bow can be a tricky task, but it isn’t impossible. With the proper materials and a bit of patience, you can easily master the process and get your bow shooting again in no time. Always take your time to make sure everything is done correctly and that your bow is safe and in proper working order. When you’re done, you’ll have a smooth, accurate, and powerful compound bow that you can enjoy for years to come.
Related Products:
- How To Change A Compound Bow String?
- How Often To Change Compound Bow String?
- How To Change Poundage On A Compound Bow?
- How To Change Limbs On A Compound Bow?
- How To Change The Poundage On A Compound Bow?
- How To Change Draw Weight On Compound Bow?
- How To Change Draw Weight On A Compound Bow?
- How To Change The Draw Weight On A Compound Bow?
- How Often Should You Change Your Compound Bow String?
- How To Change Draw Length On Compound Bow?
- How to change the draw length and weight on a Barnett vortex hunter
- How To String Compound Bow?
- How To Build A Compound Bow String?
- How To Change A Peep Sight On A Compound Bow?
- NRTR 2 – How to Replace String and Cables
Last update 2021-01-05. Price and product availability may change.