Chaning the poundage on a compound bow is a fairly simple, albeit time consuming process that requires patience and attention to detail. It is important to carefully follow the instructions that came with the bow in order to ensure it is set up properly and will perform optimally. This article will cover the steps necessary to adjust the draw weight on a compound bow.
Table of Contents
Step 1: Remove all accessories from the bow
Before making any adjustments to the draw weight, all components and accessories, such as sights, peep sights, stabilizers, vibration dampeners, and quivers, should be removed from the bow. This will make the steps needed to adjust the draw weight easier to access, and will also prevent any of the components from becoming damaged.
Step 2: Locate the cable guard screws
Once the components have been removed, the cable guard can then be accessed. This is typically done by unscrewing the screws that are used to secure the cable guard. The screws are usually located on the top of the bow, as close as possible to the cable guard. Once the screws have been removed, the cable guard should slide off from the bow.
Step 3: Adjust the draw length
Once the cable guard has been removed, it is then time to adjust the draw length. This is typically done by adjusting the cable stops. The cable stops should fit securely, and should be adjusted accordingly in order to achieve the desired draw length. The cable stops should be adjusted on both sides of the bow, in order to ensure that the cables are even and the draw length is correct.
Step 4: Adjust the draw weight
Once the draw length has been adjusted, it is then time to adjust the draw weight. This is typically done by adjusting the limb bolts on the bow. The limb bolts should be adjusted on both sides of the bow in order to achieve the desired draw weight. It is important to remember that the limb bolts will affect the draw weight, however, the draw length will not be affected by the limb bolts.
Step 5: Reattach the cable guard
Once the draw weight has been adjusted, the cable guard should then be reattached to the bow. The screws that were removed in step two should then be used to secure the cable guard. It is important to make sure that the cable guard is secure and properly adjusted.
Step 6: Reattach components and accessories
Once the cable guard has been secured, all of the components and accessories that were removed in the first step should be reattached. This should be done in order to ensure that the compound bow is set up correctly and will perform optimally.
In conclusion, changing the poundage on a compound bow is a fairly simple process that requires patience and attention to detail. By carefully following the steps outlined above, the process of adjusting the draw weight on a compound bow can be successfully completed. Properly adjusting the draw weight will ensure that the compound bow is set up correctly and will perform optimally.
Related Products:
- How To Change The Poundage On A Compound Bow?
- How To Change Draw Length On Compound Bow?
- How To Adjust A Compound Bow Poundage?
- How To Change Draw Weight On Compound Bow?
- How To Adjust The Poundage On A Compound Bow?
- How To Change Draw Weight On A Compound Bow?
- How To Change The Draw Weight On A Compound Bow?
- How To Change Draw Length On A Compound Bow?
- How to change the draw length and weight on a Barnett vortex hunter
- How To Adjust Poundage On Compound Bow?
- How To Change Limbs On A Compound Bow?
- How To Adjust The Pull Weight On A Compound Bow?
- How To Adjust Weight On Compound Bow?
- T-Bone's Tips: How To Set Up A Low-Poundage Bow
- How To Adjust Draw Length On Bear Compound Bow?
Last update 2021-01-05. Price and product availability may change.