Cutting arrows for a compound bow takes skill and patience, but the results can be satisfying. When done correctly, it can even improve the accuracy of your shot and make the bow much easier to use. Knowing the proper steps for this task can help ensure that you get the best results possible.
Table of Contents
Steps for Cutting Arrows for a Compound Bow:
1. Gather Your Supplies
You will need a few supplies to properly cut arrows for your compound bow. You will need a saw to cut the arrow shafts to the appropriate length, as well as bands to secure them. You’ll also need a straight edge with which to measure the length of your arrows and a marker to identify the shafts. Most compound bow shooters prefer to purchase pre-made fletchings, but you can make them yourself if desired. Lastly, you will need an appropriate adhesive to secure the fletchings to the shaft.
2. Determine Your Arrow Length
Once you have gathered your supplies, the next step is to measure the length of the arrow shafts that you wish to use. It is important to measure the correct length so that the arrows will fly correctly. To determine your arrow length, measure the distance between the nose of the arrow and the nocking point of your bow. The distance should be two and a quarter inches.
3. Cut the Arrow Shafts
Once you have measured the proper length, use a saw to cut the arrow shafts to the correct size. Be sure to make clean, precise cuts to ensure that the arrow will fly well.
4. Attach the Bands
Now that the arrow shafts are the correct length, use bands to secure them in place. Start from the nocking point and wind the bands around the shaft in a clockwise direction. Make sure to keep the bands tight and evenly spaced. Wrap them at least twice to ensure that the arrow is securely fastened.
5. Add the Fletchings and Adhesive
The last step is to add the fletching and secure it with adhesive. An appropriate adhesive for this task is cyanoacrylate, which helps to give the arrows an aerodynamic edge. Start by applying the adhesive to the fletching and the arrow shaft. Make sure it is evenly distributed. Then, place the fletching into its appropriate place and hold it with your thumb until the adhesive has dried to the surface. When the fletching has been secured, you are ready to shoot!
As you can see, cutting arrows for a compound bow is not a difficult task if you follow the steps outlined above. With careful attention and practice, you can ensure that your arrows are properly cut to ensure accuracy and ease of use. Once you have finished cutting and fletching your arrows, you can go out and begin fine-tuning your skills as a compound bow shooter!
Related Products:
- How To Choose Compound Bow Arrows?
- How To Choose Arrows For Compound Bow?
- How To Choose The Right Arrows For Your Compound Bow?
- How To Choose Arrows For A Compound Bow?
- How To Choose The Right Arrow For Your Compound Bow?
- How To Know What Arrows To Buy For Compound Bow?
- How To Guide on Selecting, Building, and Tuning Your Hunting and Target Arrows From the Ground Up
- How To Bare Shaft Tune A Compound Bow?
- How To Buy Arrows For A Compound Bow?
- How To Figure Out Arrow Length For Compound Bow?
- How To Attach Quiver To Compound Bow?
- How To Make A Compound Bow String?
- How Long Should My Arrows Be For My Compound Bow?
- How To Choose An Arrow For A Compound Bow?
- How To Choose The Right Arrow For Compound Bow?
Last update 2021-01-05. Price and product availability may change.