All compound bows have some parts that require regular maintenance and tuning. The specific measurements taken to ensure your bow is set up to perform at its best are called the specs, and one of the most important is the brace height. Brace height is the vertical distance from the deepest bow curve (the nock) to the pawl—the point at which the arrow is released. It’s essential to measure the brace height accurately and make adjustments accordingly, as it directly affects arrow speed, arrow accuracy, and the shooter’s draw length.
Table of Contents
How to Measure Brace Height on a Compound Bow
Step 1: Set Up for Measurement
Before measuring, ensure that the bow is in a relaxed, non-tensed state. Make sure that the cable guide is correctly in-place and that any dampening material on the bow (including skins, string silencers, etc) is loosely inserted only. Inspect that all components are correctly installed and that they are not interfering with the measurement of brace height.
Step 2: Measurement
- Using a measuring tool, such as a metal ruler or metal tape measure, measure the distance from the deepest bow string curve (the nock) to the ‘pawl’ which serves as the point at which the arrow is released.
- Brace height is typically measured in either inches or centimeters.
- Almost all bows have a maximum recommended brace height range, and it is important that the brace height remains within the recommended tolerance.
- Make sure that the ruler is placed vertically while measuring the brace height. This is to prevent any erroneous readings, as a misplaced ruler will make an inaccurate measurement.
Step 3: Measurement Adjustment
If the measured brace height is outside the recommended tolerance of your bow, adjustments will need to be made. All compound bows are adjustable, and the adjustment of the string’s tension can raise or lower the brace height. Low brace height will make the bow more powerful, but risk over straining the bow’s limbs and other components.
Measuring the brace height of a compound bow is an important step in ensuring accuracy, consistency and peak performance. It is an essential component of bow tuning and takes no more than a few minutes. Regularly checking, measuring, and adjusting the brace height can help maintain consistency with your shot, and ensure you are reaching your peak performance.
When measuring the brace height of your bow, ensure that the ruler is placed vertically, and that all parts of the bow are functioning properly and correctly installed. Making sure to stay within the recommended range is essential and, should adjustments need to be made, ensure that you do so correctly to avoid over-straining any of your bow’s components. Regularly check your measurements and make necessary adjustments, to ensure your bow is always accurately tuned and operating at its best.
Related Products:
- How To Adjust Brace Height On A Compound Bow?
- How To Measure For A Compound Bow?
- How to set Nock Height on a Compound Bow
- How To Measure Compound Bow String Length?
- How To Measure Draw Length On A Compound Bow?
- How To Measure Compound Bow Draw Length?
- How To Measure Draw Length For A Compound Bow?
- How To Measure Draw Length On Compound Bow?
- How To Measure Draw Length For Compound Bow?
- How To Measure A Compound Bow String?
- How Do You Measure Draw Length On A Compound Bow?
- How To Measure Draw Length Of A Compound Bow?
- How To Measure Draw Length Compound Bow?
- How Do You Measure Draw Length For A Compound Bow?
- How To Adjust Draw Length On Compound Bow?
Last update 2021-01-05. Price and product availability may change.