Measuring the draw length of a compound bow is a critical step in making sure that you have the proper size bow for your height and draw length. It is important to understand the basics of measuring draw length in order to make sure that you have the best fit for you when shooting. This guide will provide information on how to measure draw length on a compound bow, as well as explain the differences between a draw length adjustment with a knurled knob versus a screw in draw length adjustment.
Table of Contents
How To Measure Draw Length Compound Bow
Step 1: Find Center Shot
The first step in measuring draw length is finding the middle of the bow’s center shot. To do this, use a straight edge, such as a piece of wood, an allen wrench, or a tool specifically designed for this purpose. Draw the straight edge along the length of the bow’s center shot, then mark the center spot.
Step 2: Determine Anchor Point
Once you have found the center of the bow’s center shot, you can determine where the anchor point needs to be. This is the point where the bowstring’s nocking point should be when fully drawn. In general, the anchor point should be 1-2 inches below the bow’s center shot. Mark the nocking point’s location for later reference.
Step 3: Determine Draw Length and Draw Weight
Once you have determined the anchor point, you can measure the draw length from the center of the bow’s center shot to the nocking point. This will give you the draw length, which is the maximum distance your bow should draw back when fully drawn. The draw weight is the amount of force required to draw a bow to the draw length. Some bows come with a draw length adjustment with a knurled knob or a screw in draw length adjustment. You can use these to increase or decrease draw length and draw weight range as your skill progresses.
Step 4: Try It Out
Once you have your draw length and draw weight set, it’s time to try it out. Before shooting any arrows, shoot a few practice shots without an arrow to make sure your draw length and draw weight are comfortable and accurate. This will help you get the feel of your bow and make sure you have all of your safety precautions, such as using shooting glasses, in place.
Step 5: Adjust As Needed
If your draw feels uncomfortable or if your draw length or draw weight isn’t correct, you can adjust as needed. If you are using a knurled knob or screw-in draw length adjustment, you can turn the knob in small increments until the desired draw length and draw weight have been reached. Once you have achieved the proper draw, you can start shooting and become an expert archer.
Measuring draw length for a compound bow accurately is important for making sure you have the best fit for you. Start by finding the center shot, and then determine the anchor point which is typically about 1-2 inches below the bow’s center shot. Measure the draw length from the center to the nocking point on the bow, and use a knurled knob or screw-in draw length adjustment to increase or decrease the draw length and draw weight range as needed. Knowing how to measure draw length on a compound bow accurately will help ensure that you have the best bow fit and shooting experience.
Related Products:
- How To Measure Draw Length On A Compound Bow?
- How To Measure Draw Length On Compound Bow?
- How To Measure Compound Bow Draw Length?
- How To Measure Draw Length For Compound Bow?
- How To Measure Draw Length For A Compound Bow?
- How To Measure Draw Length Of A Compound Bow?
- How To Determine Draw Length On A Compound Bow?
- How Do You Measure Draw Length For A Compound Bow?
- How Do You Measure Draw Length On A Compound Bow?
- How To Figure Your Draw Length For A Compound Bow?
- How To Determine Your Draw Length Compound Bow?
- How To Adjust Draw Length On A Pse Compound Bow?
- How To Adjust Draw Length On A Compound Bow?
- How To Determine Draw Length For A Compound Bow?
- How To Determine Proper Draw Length For Compound Bow?
Last update 2021-01-05. Price and product availability may change.