Paper tuning a compound bow is one of the most critical steps in setting up a bow for spot and field archery, ensuring the arrow travels the correct path from the bow to the target. To begin, you will need a paper tuning kit, a bow press, and a selection of arrows.
Table of Contents
Step-by-Step Guide to Paper Tuning a Compound Bow
Step 1: Set Up the Paper Tuning Kit
Set up the paper tuning kit, carefully securing the paper strip stapled to the board and the black line near the center. Place the stand approximately 10 yards from your intended target.
Step 2: Install the Bow Press
Install the bow press and carefully remove the bowstring of the bow in use. Adjust the press as per the manufacturer’s instructions to accommodate the bow.
Step 3: Adjust the Tuning Mods and Cams
Adjust the tuning mods and cams on the bow to find the correct level of tension. Loosen the cable guard, limb bolts, stabilizer, and the press.
Step 4: Attach the Arrow Rest and Stabilizer
Reattach the arrow rest and stabilizer to the bow, ensuring all components are tightly secured. Additionally, double-check for any nocks, fletchings, or serving that may be loose.
Step 5: Fire the Initial Arrows
Fire the initial arrows at the paper strip, ensuring each one passes directly across the black line from left to right. Rotate the limb bolts, cable guard, and stabilizer one-quarter turn if the arrows pass from the right to left line.
Step 6: Check Vane Alignment
Check the arrow vanes to ensure they are aligned with the end of the arrow shafts. If not, adjust the rest as needed, either with an arrow rest adjustment tool that comes with the paper tuning gears, or by loosening the rest and using a setting washer
Step 7: Inspect the Arrows
Inspect the arrows each subsequent time they are fired. Look for indications of any irregularities in their flight paths, such as an offset or tear in the paper, as these can reveal an improperly fitted bow string, arrow rest, or cable guard.
Step 8: Make Adjustments
Make any adjustments needed to the bow based on the observations from the inspection of the arrows. If the arrows come back from left to right, adjust the opposite direction. When you’re satisfied with the result, remove the press, remove the arrows, and reattach the bowstring.
Paper tuning a compound bow is essential to achieving a successful setup for spot and field archery. By following the above steps, you should be able to paper tune your bow and adjust it accordingly to ensure a consistent and accurate flight path for your arrows. With patience and practice, you’ll soon be shooting bull’s-eye!
Related Products:
- How Do You Paper Tune A Compound Bow?
- How To Tune A Compound Bow?
- How To Bare Shaft Tune A Compound Bow?
- How to tune a Hoyt compound
- How to Tune Your Compound Hunting Bow so your Broadheads Group with your Field Points
- How To Tune Compound Bow?
- How Much To Tune A Compound Bow?
- How Do You Tune A Compound Bow?
- How Much Does It Cost To Tune A Compound Bow?
- Bowhunting How-to: Paper tuning
- How To Tune A Compound Bow
- How To Adjust The Draw On A Compound Bow?
- How To Adjust Arrow Rest On Compound Bow?
- How To Balance A Compound Bow?
- How To Sight In A Compound Bow 3 Pin?
Last update 2021-01-05. Price and product availability may change.