Pulling back a compound bow correctly is essential for accurate shooting. Knowing the correct technique is especially important for beginner archers. The following steps will help ensure you can accurately shoot your compound bow.
Table of Contents
Step By Step Instructions For Pulling Back A Compound Bow
1. Set Your Drawing Hand
First, take your drawing hand and place it on the handle of the bow the same way you would when shooting the bow. Make sure your draw hand is secure and that you have good support of the bow in your hand. If your draw hand is too tight, you may not be able to draw the bow properly.
2. Injury Prevention
You will want to practice good safety procedures when taking your draw hand off the bow. Some bows can be extremely difficult to pull, so if not done properly you may injure yourself. Make sure to keep your fingers out of the string’s path, or you may end up with cuts or bruises.
3. Take Up The Slack
Once your hand is on the bow, slowly begin to take up any slack that exists in the string. This is typically done slowly and with no jerking motion or sudden movements. Take up the slack slowly, and when the tension gets to a slightly uncomfortable level, then stop and hold it there.
4. Grip The Bow
After the tension has been taken up, make sure your drawing hand is secure and your grip is good on the bow. You should have good support of the bow in your hand and your draw hand should be in a comfortable position.
5. Position Your Bow Arm
When holding the bow in your bow arm, it is important that your elbow is in a comfortable position. Your arm should be bent at an angle so you can rest the compound’s riser against it. Your bow arm should also be in a strong and supported position.
6. Draw The Bow
When you are ready, slowly draw the bow back until the bowstring is in line with your face. Make sure that you draw the bow back smoothly and with no jerking motions. If you jerk the bow back it can cause the arrow to lose its aim and affect accuracy.
7. Aim The Bow
When the bowstring is in line with your face, you should be able to easily aim your bow at the target. Hold the bow at the same angle, and adjust where you look in order to line up the shot. Make sure you are looking down the shaft of your arrow for accurate aiming.
Pulling back a compound bow correctly is the foundation for accurate shooting. By following these steps, you will be able to pull the bow back with practice and accuracy, and greatly improve your chances of hitting the bulls eye. Always follow proper safety procedures, and practice often to maintain your shooting accuracy.
Related Products:
- How To Pull A Compound Bow Back?
- How To Make A Compound Bow Easier To Pull Back?
- Trying to pull back the 92 pound hammer 🏹
- How To Draw Back A Compound Bow?
- How To Adjust The Pull On A Compound Bow?
- How To Carry A Compound Bow On Your Back?
- How To Adjust The Pull Weight On A Compound Bow?
- How To Adjust Pull Weight On Compound Bow?
- How To Carry Compound Bow?
- How To Draw Compound Bow?
- Compound Bow 110 Pull Back
- How To Draw A Compound Bow Correctly?
- Compound Bow Pull Back
- How To Correctly Shoot A Compound Bow?
- How To Properly Draw A Compound Bow?
Last update 2021-01-05. Price and product availability may change.