Restringing your compound bow without a press is not difficult, but does require some basic knowledge and practice to do it properly. A compound bow is a type of bow that uses a system of pulleys and cams to increase the distance and speed of the shot. Like any mechanical device, the strings of the bow need to be replaced periodically to keep it in proper working order. Knowing how to restring a compound bow without a press is a valuable skill to have if you are a bow hunter or an archery enthusiast.
Table of Contents
Step By Step Guide To Restring a Compound Bow Without Press:
Safety First
Before you begin the restring process, it is important to read the instructions for your particular bow. Your bow manufacturer may have specific instructions for you to follow and it is important to follow them closely to ensure your safety and the proper working order of your bow. Also, be sure to take all necessary safety precautions before beginning, such as wearing eye protection when removing and installing strings.
Find the Right String Length
The first step in the restring process is to measure the length of the string you will need. This measurement will depend on the type of bow you have and the poundage you are looking for. Follow the manufactures guidelines for string length, as this is the only way to ensure proper fit.
Prepare Your New String
Once you have the proper length string, prepare it for installation by waxing it and attaching the serving. The serving is the protective coating put on the string to guard against wear and is usually sold separately from the new string.
Attach One End of the String
Once the new string is ready, it’s time to attach one end to the bow. Typically this end will be attached using a string loop knot. Pull the bowstring until the knot comes tight, then secure it with a bowstring lock.
Install the Cables and Cams
Next, attach the cables and cams to the opposite end of the string. Pull the bowstring until the cams come into contact with the string, then use a bowstring lock to secure them on the string. Be sure to get the cams lined up properly with the bowstring and make sure they are free to rotate smoothly.
Attach the Opposite End of the String
Once the cams are attached, it’s time to attach the opposite end of the string. This is typically done with a loop knot as well. This is the same knot used to attach the string on the one end, just pulled tighter to secure the string.
Tune the Bow
The final step in the restring process is to tune the bow. This is done by adjusting the cams, using a bow press, if necessary, and checking that the arrows fly correctly. If they do not, some adjustments may need to be made to ensure optimal performance.
Restringing a compound bow without a press is not overly difficult, but it does require some knowledge and practice. It’s important to follow the instructions in the bow’s owners manual and to take safety precautions when replacing the string. Following these steps and taking the necessary care will help you to restring your compound bow safely and efficiently.
Related Products:
- How To Restring A Compound Bow?
- How Often To Restring Compound Bow?
- How Long Does It Take To Restring A Compound Bow?
- How To Compress A Compound Bow Without A Press?
- How To Build A Compound Bow Press?
- How To Restring Compound Bow?
- How Much Does It Cost To Restring A Compound Bow?
- How Much To Restring Compound Bow?
- How Do You Restring A Compound Bow?
- How Much To Restring A Compound Bow?
- How Often Do You Need To Restring A Compound Bow?
- How to Restring and Re-Cable Your Genesis® Bow
- How Much Is It To Restring A Compound Bow?
- How To Make A Compound Bow String?
- How Often Should You Restring A Compound Bow?
Last update 2021-01-05. Price and product availability may change.