Finding the proper draw length of a compound bow is one of the most important steps of proper archery setup. The correct draw length is essential for accuracy and comfort while shooting the bow. Fortunately, it is not too difficult to calculate the draw length needed for a particular bow and shooter combination. With a few simple steps, you can find the optimal draw length for maximum accuracy and comfort.
Table of Contents
Step 1: Measure Your Arm Span
The first step in determining your draw length is to measure your arm span. This can be done by standing with your arms extended out to the sides, and then measuring tip to tip. The arm span is typically between the same length as your height, and slightly longer.
Step 2: Calculate your Draw Length
Once you have your arm span measured, you can then calculate your draw length. The formula for this calculation is your arm span divided by 2.5. This will give you your draw length. If the result is an odd number, round it up to the nearest even number.
Example
If your arm span is 70 inches, your draw length would be 28 inches (70/2.5=28). That would be the optimal draw length for a compound bow.
Step 3: Comparing your Draw Length to the Bow Specifications
Now that you know your draw length, the next step is to compare it to the bow specifications. Most bows will list their draw length range, usually the minimum and maximum draw length, on the packaging. Make sure the bow’s draw length range includes your number.
Step 4: Adjusting the Bow
If your calculated draw length falls within the bow’s draw length range, you can adjust the bow to make it fit your draw length. Most compound bows have movable modules that can be changed in order to set the draw length to your desired length. Also, the bow may need to be adjusted for proper performance, such as adjusting the draw weight or let off.
Step 5: Checking the Fit
Once you have adjusted the bow to your draw length, the final step is to check the fit. Stand with your bow at full draw and make sure your elbow is not too high or too low. Your elbow should be slightly below your shoulder when you are at full draw. If your elbow is too high or too low, you will need to readjust the bow until it fits properly.
Finding the right draw length is an essential part of setting up your compound bow properly. With just a few simple steps, you can easily calculate your draw length and make the necessary adjustments to ensure a comfortable and accurate bow setup. It is important to remember to always check the fit of your bow before shooting it to ensure proper form and performance.
Related Products:
- How To Find Draw Length On Compound Bow?
- How To Find Draw Length For A Compound Bow?
- How To Find My Draw Length For A Compound Bow?
- How To Find Draw Length For Compound Bow?
- How To Find Your Proper Draw Length in Archery
- How To Determine Your Draw Length Compound Bow?
- How To Figure Your Draw Length For A Compound Bow?
- How To Adjust Draw Length On Bear Compound Bow?
- How To Figure Draw Length For Compound Bow?
- How To Determine Draw Length On Compound Bow?
- How To Change Draw Length On A Compound Bow?
- How To Adjust Draw Length On A Pse Compound Bow?
- How To Adjust Draw Length On A Diamond Compound Bow?
- How To Adjust Your Draw Length On A Compound Bow?
- How To Adjust Draw Length On Old Compound Bow?
Last update 2021-01-05. Price and product availability may change.