Tuning your compound hunting bow is essential to improving accuracy and consistency for each arrow shot. Good tuning will also ensure that broadhead groupings and field points are aligned properly. In this article, we will discuss how to tune your compound hunting bow so that your broadheads will group with your field points.
Table of Contents
- 1 Step 1: Check Your Bow’s Draw Length
- 2 Step 2: Check Your Nocking Point
- 3 Step 3: Check Your Arrows
- 4 Step 4: Adjust Your Arrow Rest
- 5 Step 5: Check Your Sight Settings
- 6 Step 6: Adjust Your Bow for Broadhead Accuracy
- 7 Boys Compound Bow And Arrow Set Age 10
- 8 Compound Bow Crank
- 9 Compound Bow Cradle
- 10 Lh Compound Bow Adult
- 11 Compound Bow Site Trophy Ridge
- 12 Bow Stand For Genesis Compound Bow
Step 1: Check Your Bow’s Draw Length
The first step in tuning your compound hunting bow is to check your draw length. The draw length is the distance between the bow’s string and the back wall where the arrow is placed before shooting. It affects the performance of the bow because it affects the arrow’s speed and accuracy. It should be set according to your height and arm length. If it is too short, it will make it more difficult to shoot accurately. You can measure your draw length with a ruler or a caliper.
Step 2: Check Your Nocking Point
After checking your draw length, the next step in tuning your compound hunting bow is to check the nocking point. Nocking points are the area of the bowstring where the arrow is placed before shooting. It is important to make sure that the nocking point is set correctly so that the arrow is properly aligned with the center shot. To check the nocking point, hold the bow in your hands and draw the bowstring back along with the arrow. Make sure the arrow is in line with the center shot and then adjust the nocking point accordingly.
Step 3: Check Your Arrows
It is essential to check your arrows before shooting. Make sure that all arrows are in good condition and have straight shaftes. Inspect the fletchings and make sure that there are no splits or cracks. Also, make sure that the points are sharp and in good condition. Replace any arrows that are in poor condition.
Step 4: Adjust Your Arrow Rest
The arrow rest should be adjusted in order to ensure that the arrow is aligned with the center shot. You will need to adjust the arrow rest to make sure that the nock fits onto the arrow rest without forcing it. Make sure that the nock does not slip off of the arrow rest when shooting.
Step 5: Check Your Sight Settings
The sight must be adjusted in order to ensure that the arrow will fly in the same direction each time. First, you will need to align the top of the sight with the center dot on the bow. Next, adjust the sight pins to the proper distances. Last, make sure that the sight is level and not angled either to the left or right.
Step 6: Adjust Your Bow for Broadhead Accuracy
Once the draw length, nocking point, arrows, arrow rest, and sight are set correctly, it is time to adjust the bow for broadhead accuracy. First, place a few field points at 20 yards and shoot. Mark the center of the groupings and then adjust the sight accordingly to make sure the broadheads group with the field points. Adjust the sight left or right, and up or down, depending on which groupings are off from the center. Once the broadheads are grouping with the field points, your compound hunting bow is properly tuned and ready to be taken out hunting.
Tuning your compound hunting bow is essential for accuracy and consistency and is also important for ensuring broadhead groupings and field points are properly aligned. Following the steps outlined in this article will help you tune your compound hunting bow so that your broadheads group with your field points. It is important to remember to check your draw length, nocking point, arrows, arrow rest, and sight settings. Lastly, adjust your sight to make sure the broadheads group with the field points when shooting. Proper tuning will help you get the most out of your compound hunting bow.
How to Tune Your Compound Hunting Bow so your Broadheads Group with your Field Points
In this Nock On Dead Center Segment, sponsored by Yamaha Outdoors, John Dudley gives you tips on how to make your broadheads group with your field points. Follow this and other tips and tricks from this channel to become a better bowhunter or target archer.
FOR MORE ARCHERY COACHING AND TIPS VISIT THE SCHOOL OF NOCK HERE – https://nockonarchery.com/school-of-nock/
Source video. Follow the youtuber for more.
Related Products:
- How To Tune A Compound Bow?
- How Much Does It Cost To Tune A Compound Bow?
- How to tune a Hoyt compound
- How To Paper Tune A Compound Bow?
- How To Tune Compound Bow?
- How To Bare Shaft Tune A Compound Bow?
- How Do You Tune A Compound Bow?
- Compound Bow Field Points
- 8–32 Threads Compound Bow Field Points
- How To Find Center Shot On A Compound Bow?
- How To Measure Draw Length Compound Bow?
- How To Adjust The Pull On A Compound Bow?
- How To Adjust A Compound Bow?
- How Do You Paper Tune A Compound Bow?
- How To Sight In Your Compound Bow?
Last update 2021-01-05. Price and product availability may change.