Checking the string of your bow isn’t necessarily rocket science, but it could prove to be one of the most important regular maintenance tasks for a longbow or recurve bow. It is the lifeblood of the bow and, if neglected, could lead to more serious damage or even the demise of the bow. Here, we explore T-Bone’s Tips: How To Check Your Bow String and explain the important steps that should be considered when regularly checking your bow string.
Table of Contents
T-Bone’s Tips: How To Check Your Bow String
Inspection
The first thing you should do is get a proper inspection of your bow and look for any signs of wear and tear. Start by looking at the strands of the string and see if there are any broken or fraying pieces. If so, then you’ll need to get a replacement string. Don’t forget to check the string’s serving pieces, the pieces of material around the loops of the string to protect it from wear and tear. If any of these have been compromised, look into getting a new serving rope.
Cleaning
Once you’ve inspected your string for any visible damage, give the string a good cleaning. You can do this by simply running a dry cloth or paper towel along the length of the string to remove dirt and grime. If there are any tough stains on the string, you can take a small amount of soapy water and use a soft brush to clean the string. Be sure to rinse off the soap when you’re finished and let the string dry completely before using it again.
Tension
One of the most important aspects of any bowstring is its tension. This is what provides the draw power of the bow and it can be checked by using a bowstring tester. If the string is too loose, it will lack power and accuracy. On the other hand, if the string is too tight, it can cause undue stress on the bow, compromising its integrity. Make sure to adjust the tension of the string as needed so that it is at the right level of tension.
Replacement
Finally, if your string is beyond cleaning and tightening, it may be time to consider replacing it. This should be done with care as a string that is not properly fitted can cause damage to your bow. Be sure to measure and properly fit the new string to the bow before attempting to use it.
Regularly checking your bow string is the key to avoiding excessive bow damage and getting the most out of your bow. Following T-Bone’s Tips can help you ensure that your bow is always up to par and ready to be used. Make sure to inspect, clean, and adjust the tension of your bowstring as needed and replace it when necessary to keep your bow in perfect condition.
T-Bone's Tips: How To Check Your Bow String
When should you change out your bow string? Travis “T-Bone” Turner offers advice on maintaining your bow string and how to determine when it’s time for a new one.
-~-~~-~~~-~~-~-
Please watch: “203” Colorado Whitetail with HUGE Mass | Vicki Cianciarulo”
-~-~~-~~~-~~-~-
Source video. Follow the youtuber for more.
Related Products:
- T-Bone's Tips: How To Set Up A Low-Poundage Bow
- T-Bone's Tips: How To Choose a Stabilizer
- How To Check Compound Bow Draw Weight?
- How To Check Draw Weight On A Compound Bow?
- How To Wax Your Genesis® Bow's String and Cable
- How To Make A Compound Bow String?
- Bone Collector Compound Bow
- Wish Bone Compact Compound Bow
- Bone Collector Bow Case Review! Best Way To Protect Your Bow
- How To Check Draw Length On A Compound Bow?
- How To Build A Compound Bow String?
- Archery Basics 15 – how to make your own bow string – english
- How To Change A Compound Bow String?
- How To Re String Compound Bow
- How To Clean A Compound Bow?
Last update 2021-01-05. Price and product availability may change.