Professionals and amateur archers alike need to know how to adjust draw length on a Bear Compound Bow. Making adjustments to the draw length of a bow is essential to archery success as the draw length will affect the arrow spine, draw weight, and performance of the bow. Learning how to adjust draw length correctly can help ensure your bow is tuned to perform as accurately and efficiently as possible.
Check the Bow’s Serial Number
Before you start adjusting the draw length, you’ll need to check the bow’s serial number. You can find this printed on the lower limb of the bow. Knowing the serial number will help determine the maximum allowable draw length limit for your bow.
Adjusting The Draw Length of Your Bear Compound Bow
When adjusting the draw length of your Bear Compound Bow, you’ll need to make sure to follow these steps:
- 1. Subtract 1/2-inch off the maximum draw length on the bow. The maximum draw length depends on the serial number and you’ll want to make sure to stick to the lower limit. Subtracting 1/2-inch will help ensure the bow is not overstressed, and is safer for your use.
- 2. Increase the draw length gradually. Once you’ve started adjusting the draw length, it’s best to increase the length gradually. Make sure you don’t increase more than 1/4-inch at a time, as this could potentially cause damage to the bow.
- 3. Check the draw stop each time you increase the draw length. The draw stop is the bit which prevents the bow from exceeding its maximum draw length. Check the draw stop to ensure it is doing its job correctly and to avoid any potential damage.
- 4. Perform the paper tuning test. Testing your bow on paper is one of the best ways to determine if your draw length is properly adjusted. This method involves shooting arrows through a sheet of paper to analyze the flight of the arrow. If the arrow is flying in a straight line but exiting the paper at an angle, then your draw length needs to be adjusted.
- 5. Check the peep sight and nocking point. Once you’ve adjusted your draw length, it’s important to check the peep sight and nocking point. Adjusting the draw length may shift the peep sight and the nocking point, so you’ll need to make sure these are properly aligned.
Adjusting the draw length of a Bear Compound Bow is an important part of setting up your bow accurately. Learning how to adjust draw length correctly can help you maximize the performance of your bow and ensure that it is in optimal condition for shooting. Following the steps outlined above can help you properly adjust draw length and make sure your bow is tuned to perform as accurately and efficiently as possible.
Related Products:
- How To Adjust Draw Length On Bear Compound Bow?
- How To Adjust Draw Length On Compound Bow?
- How To Adjust Your Draw Length On A Compound Bow?
- How To Adjust Draw Length On A Hoyt Compound Bow?
- How To Adjust Draw Length On A Diamond Compound Bow?
- How To Adjust Draw Length On A Pse Compound Bow?
- How To Adjust Draw Length On A Compound Bow?
- How To Adjust Compound Bow Draw Length?
- How Do You Adjust Draw Length On A Compound Bow?
- How To Adjust Draw Length On Old Compound Bow?
- How To Adjust Draw Length On A Martin Compound Bow?
- How To Adjust Draw Weight On A Bear Compound Bow?
- How to adjust draw weight and length compound bow
- How To Adjust Draw Length On A Compound Bow
- How To Adjust A Bear Compound Bow?
Last update 2021-01-05. Price and product availability may change.