▷ How To Adjust Draw Length On A Compound Bow?

For those new to bows, it may not be clear why or how you have to adjust the draw length of a compound bow. Adjusting the draw length of a compound bow is an important part of being able to accurately and consistently shoot with a bow. It affects the overall feel of the bow and further sets up the bow to suit a shooter’s body type and preferences. Knowing how to adjust draw length on a compound bow can help ensure you get the best experience out of your archery journey.

Table of Contents

1 What Is Draw Length On A Compound Bow?
2 Why Adjust Draw Length On A Compound Bow?
3 How To Adjust Draw Length On A Compound Bow?

What Is Draw Length On A Compound Bow?

Draw length on a compound bow is measured from the center of the nocking point of an arrow to the center of the grip of the bow, when the bow is at full draw. In professional archery, a deeper draw will often result in a more powerful shot with more kinetic energy transfer to the arrow, with a corresponding decrease in accuracy due to increased arrow drop.

Why Adjust Draw Length On A Compound Bow?

There are several benefits of adjusting the draw length on a compound bow. Firstly, drawing the bow to a length that suits the archer’s body ensures the best range of motion, posture and comfort while shooting. Secondly, setting the draw length will allow you to fine tune the optimal power stroke and back wall that a bow should have, increasing precision and consistency. Lastly, adjusting the draw length can also adjust the draw cycle and let-off so you can maintain peak form and accuracy while drawing the bow.

How To Adjust Draw Length On A Compound Bow?

Adjusting your draw length when using a compound bow can be a complicated but rewarding process. To ensure the greatest results, we recommend getting the assistance and advice of a trained professional for the job. However, it is possible to adjust the draw length on your own if you follow the below steps.

Step 1: Gather Your Materials

Before you begin, you will need the following materials:

A compound bow
A bow press
Allen wrenches
Adjustment modules
Archery scale
Ruler or measuring tape
A friend to help you

Step 2: Start By Pressing The String And Cables

Using the bow press, put enough tension on the bow so that the cables and limbs remain in tension, and the strings can be adjusted. Be sure to follow the manufacturer’s instructions carefully.

Step 3: Adjust The Draw Length

Once you have the bow string and cables pressed, use an Allen wrench to loosen the adjustment modules so that you can adjust the draw length. Typically, a turn of the Allen wrench will yield about an inch of draw length, so be sure to measure the draw length accurately before turning the Allen wrench.

Step 4: Measure Draw Length

Using the archery scale and ruler, measure the draw length from the nocking point to the grip. If the draw length is not to your liking, make the necessary adjustments until you reach the desired draw length.

Step 5: Install The Adjustment Modules

Once you have reached the desired draw length, reinstall the adjustment modules and tighten them with the Allen wrench. Be sure to recheck the draw length to ensure it matches the desired length.

Adjusting draw length on a compound bow requires some special tools and a bit of know-how. Doing it properly, with the help of a friend and a professional, is the most reliable way to ensure an optimal draw length and the best shooting experience. Taking the time to get it right is always worth it in the end.

Related Products:

Last update 2021-01-05. Price and product availability may change.