▷ How To Aim A Compound Bow With A Peep Sight?

Learning how to aim a compound bow correctly is an important part of archery. A compound bow has much more power than a traditional bow and arrow, and it is important to understand how to use it properly to ensure safety. If you are looking to improve your shooting accuracy, adding a peep sight can be a great way to do it. With a peep sight, archers are able to get a better view of their target and ensure a more accurate shot. This guide provides tips and information on how to set up and use a peep sight with a compound bow for successful shooting.

Table of Contents

1 Selecting a Peep Sight
2 Installing the Peep Sight
3 Using the Peep Sight

Selecting a Peep Sight

Before you can begin using your peep sight, you will need to select the right size for your application. Peep sights come in a range of sizes from 1/16″ to 5/16″ you will want to select a diameter slightly larger than the diameter of your bowstring in order to ensure it does not interfere with the flight of your arrow. Additionally, you will also want to consider the material of the peep sight. Many archers prefer a clear plastic or acrylic peep sight as it allows for more light to travel through and helps to reduce the obstruction of your target.

Installing the Peep Sight

Once you have selected the peep sight that you want to use, it is time to start the installation process.

Step 1: Cut a piece of peep tupe

First, you will need to hold the peep tupe to the bowstring and mark the point where the peep sight should be centered on the bowstring. Then, use a pair of scissors to cut the the peep tupe to the desired length.

Step 2: Tighten the Peep Tupe

Using pliers, tighten the peep tupe onto the string so it does not move. It is important that you only tighten it enough for it to securely stay in place, as over tightening it could lead to damage to the bowstring.

Step 3: Test the Peep Sight

To make sure the peep sight is correctly in place and positioned, draw your bow and sight your target. If you see the peep sight correctly centered in your sight window, the setup is complete. If not, adjust the peep tupe accordingly and repeat the process until it is properly sighted in.

Using the Peep Sight

Now that your peep sight is correctly installed, it is time to start using it. Aiming with a peep sight and compound bow is much more like aiming with a rifle than it is with a traditional bow and arrow.

Step 1: Find Your Aiming Point

You will want to start by aiming your peep sight at your target, keeping it level and in view of the sight window. Remember to keep your eye open when looking through the peep sight, as blinking can cause your aim to be off.

Step 2: Find the Anchor Point

Your anchor point is the point on your face where your bowstring should be consistently touching. This is typically the corner of your mouth, just outside your jawline. By ensuring that your bowstring is consistently at this point each time you pull the bowstring back, you will help keep your aim consistent as you draw and release.

Step 3: Aim and Release

Once you have achieved the correct aiming point and anchor point, you are now ready to fire. Aim for your target, inhale and exhale, and then release your arrow. This should be done in one fluid motion and should result in a straight and accurate shot.

Using a peep sight with a compound bow can be a great way to improve your shooting accuracy. With a few steps and some practice, you’ll be able to properly sight and aim your compound bow with ease. After setting up and properly installing your peep sight, practice by aiming and firing in a consistent manner and you’ll be sure to see your shooting accuracy improve each time you practice.

Related Products:

Last update 2021-01-05. Price and product availability may change.